P2776 Energy of Flywheel

Cussons P2776 Energy of Flywheel apparatus is an extremely robust and versatile unit comprising of the main flywheel, the mass of which can be varied by adding and removing two rings and one disc, and mounted on a heavy duty stand suitable for mounting.

P2776 Energy of Flywheel

EXPERIMENTAL CAPABILITIES

• Experiments can be performed to determine:
• The maximum (final) velocity of the descending mass
• The maximum energy content of the flywheel
• The energy stored when rotating at unit speed (1 rev/min)
• The moment of inertia of the flywheel
• The radius of gyration of the flywheel

#Energy, #flywheel, #Energyofflywheel, #Energyflywheel, #inertia, #gyration, #momentofinertia

P6248 Osborne Reynolds Apparatus

Cussons P6248 Osborne Reynolds Apparatus comprises a re-entrant bell mouthed glass experimental tube of 16 mm bore and approximately 650 mm long mounted horizontally in a 103 mm bore perspex tube.

Osborne Reynolds experiments can be conducted by the students.

EXPERIMENTAL CAPABILITIES

• Demonstration of laminar or #streamline flow, #turbulent flow and the #transition between these two regimes by observation of injected dye line.
• Determination of the lower and upper Critical Velocities and ReynoldsNumber.

#OsborneReynolds #Osborne #Reynolds #CriticalVelocities #ReynoldsNumber #hydraulics #hydraulicbench

For more information: http://www.cussons.co.uk/

P6233 Impact of Jets

Cussons P6233 Impact of Jets apparatus enables experiments to be carried out on the reaction of a jet of water on vanes of various forms. The apparatus is supported on a PVC base into which a vertical water supply pipe is fitted.

EXPERIMENTAL CAPABILITIES

• Determination of the reaction of a jet #striking a fixed flat vane, mounted normal to the jet direction, at different jet diameters and flow rates.
• As above but for a cone shaped target equivalent to an angled target plate.
• As above but for a #hemispherical target.
• Demonstration that the force exerted on the vane when struck by the jet, is proportional to the rate of change of momentum of the #jetstream.

#Impactofjets, #HydraulicBench, #Bancohidraulico, #chorrodeagua, #impactodechorro

For more information: http://www.cussons.co.uk/

P6234, P6235, P6236, P6237 Stability and Metacentric Heights.

Engineers involved in #fluids should have an understanding of #stability and #metacentric heights. Cussons vessels provide experiments to study this subject. Further stability work can be undertaken with Cussons Educational #Hydrodynamic Range.

Stability and Metacentric Heights

• #Calibration of #HydraulicBench pressure gauge.
• #Calibration of other #pressuregauges of similar rating to the Bench pressure gauge.

#Cussons P6235 Flat Bottomed Vessel is constructed from non-ferrous materials and has a detachable bridge piece and loading system. The bridge piece can be used with other hull sections so that #floatation characteristics may be directly compared.

• Experiment to illustrate the #floatation characteristics of a flat bottomed vessel (#pontoon).
• Determination of the #Metacentric Height for a flat bottomed vessel. 

FLAT BOTTOMED VESSEL

Two further types of hull section are supplied to be used in conjunction with the bridge piece, keel and mast weights etc. supplied on P6235 "Floatation characteristics of a Flat Bottomed Vessel". Both additional hulls are made from non-ferrous material and one is representative of a typical hull section whilst the other is of semi-circular form.

Cussons P6237 Centre of Pressure Apparatus consists essentially of a #toroidal quadrant pivoted on its centre line on a balance arm above a water tank. The fabricated toroidal quadrant, which has dimensions of 100 mm internal radius, 200 mm outer radius and 75 mm width

• Measurement of the #staticthrust on a vertical water submerged surface.

• Determination of the #CentreofPressure of a vertical water submerged surface.

For more information: http://www.cussons.co.uk/